How to Make a Water Gun Alarm Clock

Do you have problems waking up in the morning, do you always depend on the snooze button, or did you just have a long night and want to sleep in. Try this.

 Steps

    1
    Open the alarm clock and snip the two wires that lead from the circuit board to the speaker.
    2
    Strip the two ends of wire leading from the board and splice two longer wires to the end.
    3
    Solder the two wires together.
    4
    Take apart the water gun apart and snip the two wires leading to the trigger switch.
    5
    Strip the water gun wires with two long wires and splice and solder them.
    6
    Put the relay switch into the circuit board. Connect each pair of wires.
    7
    Set the alarm(ex. 7:15) and position the water gun.
    8
    Now enjoy your early morning wake up call.

 Tips

    Depending on the clock, you might have to cut the wires to get it open, that's okay.
    If you don't have a breadboard circuit, solder the switch and wires to a regular circuit board.

 Things You'll Need

    alarm clock
    motorized water gun
    16 gauge wire
    wire stripper
    voltage relay switch
    breadboard circuit
    soldering equipment